Equipment: LINK-BGM.KUI
| Radio Name | Address | Connected To | Signal | SNR | Ch0 | Ch1 | Rates | Last Seen | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
64D1548356AB |
64:D1:54:83:56:AB link |
Kuipers Peak LINK-BGM.KUI |
-60 dBm | 58 dB |
TX RX |
-62 dBm -64 dBm |
-63 dBm -61 dBm |
115.5 Mbps 86.6 Mbps |
2019-09-28 04:10:19
9 months ago |
||
|
6C3B6B8C35E5 |
6C:3B:6B:8C:35:E5 |
Kuipers Peak LINK-BGM.KUI |
-63 dBm | 56 dB |
TX RX |
-67 dBm -67 dBm |
-68 dBm -64 dBm |
115.5 Mbps 86.6 Mbps |
2020-07-02 09:20:17
3 minutes ago |
| IP | Hostname | Ping | DNS | MAC | Descriptive Name | Group | DHCP | Expires | - | Site |
|---|---|---|---|---|---|---|---|---|---|---|
| 44.135.160.9 | link-bgm.kui.if.hamwan.ca. (E) | Ping |
Rev |
link-bgm.kui OSPF | OSPF Routing | KUI |
Wireless
Clients
Health
Network Ports
ether1
ifName: ether1 ifType: ethernetCsmacd port_id: 145 ifVlan: ifPhysAddress: 64d1548356d4 ifOperStatus: up
ifName: ether1 ifType: ethernetCsmacd port_id: 145 ifVlan: ifPhysAddress: 64d1548356d4 ifOperStatus: up
wlan1
ifName: wlan1 ifType: ieee80211 port_id: 146 ifVlan: ifPhysAddress: 64d1548356d5 ifOperStatus: up
ifName: wlan1 ifType: ieee80211 port_id: 146 ifVlan: ifPhysAddress: 64d1548356d5 ifOperStatus: up
The tools available here vary based on your privileges and the device type.
Get POE Status
Get Spectral History
CAUTION: This will disconnect clients, be careful using on link radios.Check For Updates
CAUTION: This function will only work correctly if the remote device has working internet access. Ensure you fully understand the update before performing remote updates.Get OSPF Routes
| ifName | Status | Speed | Type | MAC Address | IP Address | ||
|---|---|---|---|---|---|---|---|
| ether1
|
up | 100000000 | Ethernet | 64d1548356d4 | |||
| ETH1-HW-OSPF
Local Network VLAN 614 |
up | 100000000 | VLAN | 64d1548356d4 |
44.135.161.138 / 26 |
||
| wlan1
|
up | 50000000 | Wireless | 64d1548356d5 |
44.135.160.9 / 30 |